User's Manual

SNMP Interface
Page 286 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
77 Set the manager information as follows:
•
snmpTargetAddrName
—any unique name
•
snmpTargetAddrDomain
—.1.3.6.1.6.1.1
•
snmpTargetAddrTAddress
—IP address of the machine where you want to receive
the traps, The port number should also be provided next to IP address (for
example, #8004)
•
snmpTargetAddrTimeout
—timeout value
•
snmpTargetAddrRetryCount
—retry count
•
snmpTargetAddrTagList
—any string that will be used as a community string to
view the traps; the default community string is
public
•
snmpTargetAddrParams
—any string, usually
group1
•
snmpTargetAddrStorageType
—3
88 Click
OK
.
The information given in Step 7 displays as a new row in the SNMP Table.
99 Click
Close
to close the SNMP Table.
You can't use both a static and dynamic trap agent configuration. You can only use one
or the other.
If you configure dynamic, the static entries will be deleted.