User's Manual

Managing Host Units

Page 218 FlexWave Prism Host, Remote and EMS 5.1 System Reference

22 (Optional) To enlarge the view, click Full Screen to open a separate window that

shows only the

ENET Configurations

table.

33 To update the counters, click

Refresh

The

ENET Configurations

view lists the Ethernet ports and their corresponding

status.

•• The row headers in the first column are as follows:

–

Switch Port

—on card processor's connection to the switch on the SeRF card

–

Craft Port

—on card processor's connection to the PHY port labeled Craft

–

OptEnetPort1-8

—Ethernet switch interface to SFP 1-8

–

Network Port

—Ethernet switch interface to on-card processor

–

Management Port

—switch interface to the PHY port labeled Network

•• The column headers, from left to right, are as follows:

–

Rx Bytes

—Receive byte counter. Increments by the byte count of frames

received, including those in bad packets, excluding preamble and SFD but

including FCS bytes

–

Rx Pkts

—Receive packet counter. Increments for each frame received

packet (including bad packets, all unicast, broadcast, and multicast

packets)

–

Rx FSC Errors

—Receive FCS error counter. Increments for each frame

received that has an integral 64 to 1518 length and contains a frame check

sequence error