User's Manual

Managing Remote Units
Page 246 FlexWave Prism Host, Remote and EMS 5.1 System Reference
© 2009 ADC Telecommunications, Inc ADCP-77-073 • Issue 2 • 11/2009
10.7 RESETTING A REMOTE UNIT
If communication and/or reverse-path fiber is lost to the Remote, a Remote Reset can
be attempted.
11 In the Function Explorer Tree, select the node that corresponds to the Remote that
you want to reset. This opens the
Prism Remote Unit Remote
-n summary that
corresponds to the selected Remote (
Remote
-n).
22 Click the
Reset Unit
button.
Only a user logged in under the admin or a Network Manager account can change Prism
system settings t
hrough the EMS.
Resetting the Remote causes Loss of Service and should not be used unless other
troubleshooting proce
sses have been followed and did not fix the issue being
experienced at the Remote.