Installation Manual

Release 3.3, Revision A 1/99
Unpacking the WAVEXpress/BTS 7
1-3.3 Clock Module
The following table describes the function of the connectors and indicators on a WAVEXpress/BTS clock module.
Figure 1-4:
Front view of the clock module
Table 1-3:
Clock module’s connectors and indicators
Connector or Indicator Function
RF Dist
Connects the internal clock via a semi-rigid coaxial cable to the CLK port on
the RF Dist card
TEST SMA connector, allowing access to the 13MHz signal for test purposes
TEST
RF DIST
13 MHz