Installation Manual
Table Of Contents
- WAVEXpress/BTS Installation and Commissioning Guide
- One - Unpacking the WAVEXpress/BTS
- Two - Internal BTS Cabling and Jumpering
- Three - Installation
- 3-1 Wall Installation
- 3-2 Table Mount
- 3-3 Rack Installation
- 3-4 Common Final Installation Procedures
- 3-4.1 Connection of the Cable Gland
- 3-4.2 Connection of the Grounding Cable
- 3-4.3 Connection of the Antennas to the Bulkhead Plate
- 3-4.4 Connection of the Optional Combiner Assembly
- 3-4.5 Connection of the Power Supply
- 3-4.6 Connection of the T1 Lines
- 3-4.7 Connection to External Alarms
- 3-4.8 Optional Voltage Standing Wave Ratio (VSWR) Check
- 3-4.9 Post Installation Checks
- 3-5 Outdoor Installation
- Four - Off-Line Commissioning
- Five - Off-Line Commissioning of a Daisy Chain
- Six - Post Off-Line Commissioning
- Seven - On-Line Commissioning
- Appendix 1 - Connection of the Combiner Assembly
- Appendix 2 - BTS Field Maintenance
- A2-1 WAVEXpress/BTS Field Replacement Maintenance
- A2-1.1 Replacing the WAVEXpress/BTS IWP card
- A2-1.2 Replacing the WAVEXpress/BTS T1 card
- A2-1.3 Replacing the WAVEXpress/BTS TRX card
- A2-1.4 Replacing the WAVEXpress/BTS RF distribution card
- A2-1.5 Replacing the clock module
- A2-1.6 Replacing power supply units
- A2-1.7 Replacing fan assemblies
- A2-1.8 Replacing filters (p/n 520081-01)
- A2-1.9 Replacing the antenna bracket with a combiner assembly
- A2-1 WAVEXpress/BTS Field Replacement Maintenance
- Checklist 1 - Installation Checklist
- Checklist 2 - Commissioning Checklist
Release 3.3, Revision A 1/99
xiii
Documentation Structure
This section lists and describes all documentation related to the 3.3 system release.
WAVEXpress/BTS Product Guide
Scope
The WAVEXpress/BTS Product Guide
is a technical reference that provides a description of the WAVEXpress/BTS
functionality, capacities, operational features, and specifications.
Audience
This guide is intended for network operators and planners who require the knowledge to plan and setup network
architecture and cells. It is also used by installation and maintenance technicians who may be interested in
understanding the network architecture and fault locating capabilities.
WAVEXpress/BSC Product Guide
Scope
The WAVEXpress/BSC Product Guide
is a technical reference that provides a description of the WAVEXpress/BSC
functionality, capacities, operational features, and specifications.
Audience
This guide is intended for network operators and planners who require the knowledge to plan and setup network
architecture and cells. It is also used by installation and maintenance technicians who may be interested in
understanding the network architecture and fault locating capabilities.
WAVEXchange Product Guide
Scope
The WAVEXchange Product Guide
is a technical reference that provides a description of the WAVEXchange
functionality, capacities, operational features, and specifications.
Audience
This guide is intended for network operators and planners who require the knowledge to plan and setup network
architecture and cells. It is also used by installation and maintenance technicians who may be interested in
understanding the network architecture and fault locating capabilities.