User's Manual Part 2

SCP-LPS20x-011-012-01H December 20, 2004
172 ADC Telecommunications, Inc.
Trace Results
Displays the results of the trace after it stops.
Start Trace
Starts the trace. Data captured by the trace is not displayed until the trace has stopped.
Stop Trace
Stops the trace and displays the captured data in the Trace results box.
Save Trace in Text Format
Click this button to save the captured data to an ASCII file.
Save Trace in PCAP Format
Click this button to save the captured data to a PCAP file, which is the format used by the Ethereal Network Protocol
Analyzer. Ethereal is free and is available for both Unix and Windows. It allows you to interactively browse the trace
data, viewing summary and detailed information for each packet to a much greater level of detail than is provided by
the text version of the trace.
PING
1. On the main menu, click Tools.
2. Click Ping. The Ping page opens.
PING PARAMETERS
Address/URL to Ping
Specify the IP address of the network device you want to ping.
Timeout
Specify how long the LPS-20x will wait for a reply to the ping before timing out.