User's Manual Part 2

December 20, 2004 SCP-LPS20x-011-012-01H
ADC Telecommunications, Inc. 169
IP TRACE PARAMETERS
Port to Trace
Choose the port to apply the trace to.
Destination
Select where the trace file will be stored/sent:
• Local: Trace file is stored on the LPS-20x. Size of the trace file is limited by available memory. When
space is exhausted, the trace is truncated.
• Remote URL: Specify the URL of the remote device to send the trace file to. Trace data is automatically
sent as it is gathered; therefore, there is no size limit to the trace. To avoid unnecessary bandwidth usage,
a filter should be used to restrict the trace.
• When using FTP://, the trace is saved in Etherneal PCAP format.
• When using HTTP://, the target server must be able to receive and save the file correctly. Server-side
scripts may be required to support this.
Timeout
Specify the amount of time the trace will capture data (in seconds). Once this limit is reached, the trace automatically
stops.
Number of Packets
Specify the maximum number of packets (IP datagrams) the trace should capture. Once this limit is reached, the
trace automatically stops.
Packet Size
Specify the maximum number of bytes to capture for each packet. The rest of the data is discarded.