User's Manual Part 2

SCP-LPS20x-011-012-01H December 20, 2004
134 ADC Telecommunications, Inc.
STANDARD MIBS
The LPS-20x supports the following MIBs:
• IEEE8021-PAE-MIB
• RFC1213-MIB – Full read support. Write support as defined below.
•802.11b
The MIB defined in "IEEE Std 802.11b/D8.0, September 2001 Annex D" has been moved under the MIB
(COLUBRIS-IEEE802DOT11).
• Colubris MIB
MANAGEMENT CONSOLES
• To manage the LPS-20x, third-party SNMP management consoles must support the SNMPV2c protocol.
MIB II SUPPORT DETAILS
The LPS-20x provides complete read support of MIB II objects 1.10. Table 14 lists all MIB II objects defined as read/
write and indicates the objects that can be “set” on the LPS-20x.
Table 14. MIB II Read/Write Objects
Set Group OID Notes
Y system sysContact
Y SysName
Y sysLocation
Y interfaces ifAdminStatus(1) Can be up(1), down(2), or testing(3)
N At AtIfIndex
NatPhysAddress
N atNetAddress
N Ip ipForwarding
N ipDefaultTLL
N ipRouteDest
N ipRouteIfIndex
N ipRouteMetric1
N ipRouteMetric2
N ipRouteMetric3
N ipRouteMetric4
N ipRouteNextHop
N ipRouteType (3) Can be other(1), invalid(2), direct(3), or indirect(4)
N ipRouteAge
N ipRouteMask