User's Manual Part 2

SCP-LPS20x-011-012-01H December 20, 2004
132 ADC Telecommunications, Inc.
CONFIGURING THE SNMP INTERFACE
This section provides an overview of the SNMP interface and the MIBs supported by the LPS-20x. The LPS-20x
SNMP interface can be reached both locally and remotely for complete flexibility.
TO CONFIGURE SNMP OPTIONS
1. On the main menu, click Management, then click SNMP. The SNMP configuration page opens.
2. Enable the options that you require. The options are described in the sections that follow.
3. Click Save.
ATTRIBUTES
System Name
Specify the name to identify the LPS-20x.
Contact
Contact information for the LPS-20x.
Community Name
This is the password that controls access to the SNMP information. A network management program must supply
this password when attempting to set or get SNMP information from the LPS-20x.
Read-only community name
This is the password that controls read-only access to the SNMP information. A network management program
must supply this password when attempting to get SNMP information from the LPS-20x. The default is public.