User's Manual Part 2

December 20, 2004 SCP-LPS20x-011-012-01H
ADC Telecommunications, Inc. 125
Coding type
The active ADSL line-encoding type configured at the CO. Supported coding types are: Inactive, G.dmt-Annex A,
Alcatel 1.4, Alcatel, ADI, and ANSI TI.413i2
Framing Mode
The active ADSL framing mode configured at the CO. Supported framing modes are: Type0, Type1, Type2, Type3,
and Type3ET
Latency
The ADSL latency mode configured at the CO. Supported latency modes are: Fixed and Interleaved
Downstream Current Bit Rate
Receive rate in bits per second of the device.
Upstream Current Bit Rate
Transmit rate in bits per second of the device.
Local Tx Power
The sum of all data-carrying DMT subcarrier powers averaged over a 1-second period.
Local Line Atten
The difference in dB between the power received at the near-end (ATU-R) and that transmitted from the far-end
(ATU-C).
Local SNR Margin
The amount of communication signal in relation to the amount of interference, or noise, on the medium, measured at
the ATU-R.
Remote Line Atten
The difference in dB between the power received at the far-end (ATU-C) and that transmitted from the near-end
(ATU-R).
Local LOS
Loss of Signal error counts since power-up, measured at the ATU-R.
Local LOF
Loss of Frame error counts since power-up, measured at the ATU-R.
Local ES
Errored Second counts since power-up, measured at the ATU-R.
Local SES
Severely Errored Second counts since power-up, measured at the ATU-R.
Local UAS
Unavailable Second counts since power-up, measured at the ATU-R.
Local FEC
Forward Error Correction counts since power-up, measured at the ATU-R.