User's Manual Part 2

December 20, 2004 SCP-LPS20x-011-012-01H
ADC Telecommunications, Inc. 107
VLAN STATUS
Use the VLAN option on the Status menu to determine the status of the virtual LAN.
WIRELESS CLIENT STATION PARAMETERS
Mac address
The Ethernet address of client station(s) that are associated to the AP.
SSID
The SSID that the client station(s) is associated with.
Association time
Indicates how long the client station has been associated with the LPS-20x.
Authorized
Applies to client stations using 802.1x only. A value of “Yes” indicates that 802.1x authentication was successful. A
value of “No” indicates that 802.1x authentication was unsuccessful. If 802.1x support is not enabled on the LPS-
20x, this field shows “yes”.
Signal
Indicates the strength of the radio signal received from the client stations. Signal strength is expressed in dBm. The
higher the number, the stronger the signal.
Noise
Indicates how much background noise exists in the signal path between client stations and the LPS-20x. Noise is
expressed in dBm. The lower (more negative) the value, the weaker the noise.
SNR
Indicates the relative strength of client station radio signals versus the radio interference (noise) in the radio signal
path. In most environments, SNR is a good indicator for the quality of the radio link between the client stations and
the LPS-20x. A higher SNR value means a better quality radio link.