User's Manual Part 2

SCP-LPS20x-011-012-01H December 20, 2004
104 ADC Telecommunications, Inc.
PER-SSID VLAN
Each wireless profile can be mapped to its own VLAN. Wireless clients that connect to a profile with VLAN support
are bridged to the appropriate VLAN via the LPS-20x’s LAN port. Address allocation and security measures are the
responsibility of the target network.
PER-USER VLAN
VLANs can also be assigned on a per-customer basis by setting a special ADC attribute in a customer’s RADIUS
account. The only restriction is that a customer cannot be assigned to a VLAN that is already mapped to the LAN
port.
To use this feature, the LPS-20x must be connected to a ADC access controller. Consult the administrator guide for
more information.
VLAN PRIORITY
The VLAN assigned by RADIUS on a per-user basis always overrides the VLAN assigned by an SSID and the
default VLAN. For example, a wireless station could be associated with an SSID that is configured for VLAN 30, but
after logging in, RADIUS could override this setting by assigning VLAN 40.
!
IMPORTANT
Per-SSID VLANs cannot have the same VLAN ID as the default VLAN ID assigned to the LAN port.