User's Manual Part 2

December 20, 2004 SCP-LPS20x-011-012-01H
ADC Telecommunications, Inc. 101
WIRELESS LINK CONFIGURATION PARAMETERS
Status
Indicates if the link is enabled or disabled.
Name
Name of the link. Click to configure it.
Remote MAC Address
MAC address of the remote LPS-20x.
SETTING PARAMETERS
When the link is enabled, it is ready to establish a connection with the remote LPS-20x.
Link Name
Identifies the link.
Speed
Sets the speed the link will operate at. Choose auto to always use the fastest speed. For load balancing, you may
want to limit the speed of a link when connecting to multiple destinations.
SECURITY PARAMETERS
When the link is enabled, it is ready to set WEP security.
None
No encryption.
WEP
Specify the encryption key the LPS-20x will use to encrypt/decrypt all data it sends and receives. The key is 128 bits
long and must be specified as 26 hexadecimal digits.
ADDRESSING PARAMETERS
Remote MAC Address
MAC address of the remote access point.
Local MAC Address
MAC address of the remote access point.
WIRELESS LINK STATUS
To view the status of the wireless links, open the Status > Wireless page.