User's Manual Part 2

December 20, 2004 SCP-LPS20x-011-012-01H
ADC Telecommunications, Inc. 97
LOCATION-AWARE AUTHENTICATION
This feature enables you to control logins to the public access network based on the wireless access point a
customer is connected to.
HOW IT WORKS
When a customer attempts to login to the public access network, the access controller sets the Called-Station-ID in
the RADIUS access request to the MAC address of the LPS-20x wireless port the customer is associated with. For
more information, see the Administrator’s Guide for the access controller.
CONFIGURATION PROCEDURE
1. On the main menu, click Security and then click Access controller. The Access controller configuration
page opens.
2. Enable the Location-aware authentication option.
3. Specify the Group Name for the Access Point.
4. Specify the same shared secret configured on the access controller.
5. Click Save.
!
IMPORTANT
This feature can only be used when the LPS-20x is installed in conjunction with an access
controller.
This feature does not support 802.1x customers and devices using MAC-based authentication.