User's Manual Part 2

SCP-LPS20x-011-012-01H December 20, 2004
96 ADC Telecommunications, Inc.
MAC-LEVEL FILTERING
MAC-level filtering enables you to control access to the LPS-20x based on the MAC addresses of client stations.
You can either block access or allow access depending on your requirements.
CONFIGURATION PROCEDURE
1. On the main menu, click Wireless and then click MAC filtering. The MAC filtering configuration page
opens.
2. Configure the parameters as described in the section that follows.
3. Click Save when you are done.
MAC FILTERING PARAMETERS
When enabled, this option enables you to control access to the LPS-20x based on the MAC address of client
stations. You can either block access or allow access depending on your requirements.
Filter Behavior
Allow MAC Address List
• Only client stations whose MAC addresses appear in the MAC address list can connect to the wireless
network.
Block MAC Address List
• All client stations whose MAC addresses appear in the MAC address list are blocked from accessing the
wireless network.
MAC ADDRESS LIST
Use this box to manage the addresses in the list. To add an address, enter it and click Add. To remove an address,
select it in the list and click Remove.