User's Manual Part 1

SCP-LPS20x-011-012-01H December 20, 2004
62 ADC Telecommunications, Inc.
CONFIGURATION – SETTING UP THE WIRELESS LAN
1. On the main menu, click Wireless, then click Wi-Fi. The Wireless configuration page opens.
2. Configure the parameters as described in the sections that follow.
3. Click Save when you are done.
ACCESS POINT PARAMETERS
Enable this option to activate the wireless access point (default). When this option is disabled, wireless client
stations will not be able to connect.
WLAN name (SSID)
Specify a name to uniquely identify your wireless network. Each client computer that wants to connect to the
LPS-20x must use this name.
Maximum number of wireless client stations
Specify the maximum number of wireless client stations that can be associated with this SSID at the same time.
!
IMPORTANT
If you turn this feature off while provisioning the LPS-20x via a wireless connection, you will lose
communication to the device.
The name is case-sensitive.
!
IMPORTANT
The total number of wireless client stations that can be connected to the LPS-20x at the same time
across all WLAN profiles is 254.