User's Manual Part 1

SCP-LPS20x-011-012-01H December 20, 2004
58 ADC Telecommunications, Inc.
Resetting the Configuration to Factory Defaults
1. Login to the management interface.
curl --dump-header cookie.txt -s -m 60 "https://24.28.15.22/goform/
Logout?username=admin&pw=admin"
2. Reset configuration to factory defaults.
curl --cookie cookie.txt -m 5 "https://24.28.15.22/goform/
ScriptResetFactory?reset=Reset+to+Factory+Default"
3. Reset the LPS-20x to activate the new configuration.
curl --cookie cookie.txt -s -m 60 "https://24.28.15.22/script/reset.asp"
SYSTEM INFORMATION
Use this screen to save troubleshooting information to your computer’s hard drive. The information in this file can
only be decoded by ADC. After you save system information, you must restart the LPS-20x to resume proper
operation.
1. On the Maintenance menu, click System info.
2. In the save system information box, click the Download button to save the system information to your
computer’s hard drive.
3. In the Restart box, click the Restart button. You will be asked to log back into the system (refer to Starting
the Management Tool on page 38).
CAUTION
Resetting the LPS-20x deletes all your configuration settings, resets the Administrator username
and password to ‘admin’ , and sets the Wireless port and LAN port IP address to 192.168.1.1.
The management tool can also be used to restart or reset the LPS-20x.
Restarting will drop all active connections.