User's Manual Part 1

SCP-LPS20x-011-012-01H December 20, 2004
46 ADC Telecommunications, Inc.
MANAGEMENT TOOL SECURITY
The management tool is protected by the following security features.
ADMINISTRATOR PASSWORD
Access to the LPS-20x management tool is protected by a username and password to safeguard configuration
settings. The factory default setting for username is admin and password is admin. It is strongly recommended that
you change both.
To change the username and/or password, do the following:
1. On the main menu, click Management. The Management tool configuration page opens.
2. In the Administrator authentication box, enter the new username, current password, the new password,
and then repeat the new password for confirmation.
3. Click Save when you are done.
WARNING
Failure to change the user name and password will leave your network at an increased risk of
attack.
WARNING
If you forget the administrator password, the only way to gain access to the management tool is
to reset the LPS-20x to factory default settings (refer to Resetting to Factory Defaults on page 28).