User's Manual Part 1

SCP-LPS20x-011-012-01H December 20, 2004
40 ADC Telecommunications, Inc.
HOME PAGE PARAMETERS
The LPS-20x does not require day-to-day management for successful, efficient operation.The most you will want to
do is inquire about status and statistics.
CURRENT IP ADDRESS
This is the IP assigned to all ports of the LPS-20x.
WIRELESS MAC ADDRESS
This is the MAC address associated with the LPS-20x.
SNMP SYSTEM NAME
Identifies the LPS-20x on your network. To set this, go to Management|SNMP.
WIRELESS NETWORK NAME (SSID)
Identifies the wireless network. Each client that wants to connect to the LPS-20x must use this name (unless the
broadcast WLAN name option is enabled, in which case no name needs to be specified on the client station).To set
this value, go to the Wireless>Wi-Fi page.
UP TIME
Indicates the amount of time that has passed since the LPS-20x was powered on or reset.
WIRELESS SECURITY MODE
Inidcates the protocol being used to secure the wireless network. By default, this is set to None.
FIRMWARE VERSION
Indicates the version number of the firmware currently loaded on the LPS-20x. To upgrade the firmware, go to the
Maintenance>Firmware>Updates page.
HARDWARE REVISION
Indicates the version number of the LPS-20x hardware.
SERIAL NUMBER
Indicates the serial number of the LPS-20x hardware.
LOGOUT
Click this button to log out. If you do not log out, the LPS-20x continues to maintain your connection as active until it
times out (after 10 minutes of inactivity).
The SSID is case-sensitive.