User's Manual Part 1

December 20, 2004 SCP-LPS20x-011-012-01H
ADC Telecommunications, Inc. 27
RESET BUTTON
The reset button is located on the lower left side of the inside of the LPS-20x (Figure 9). Use the end of a paper clip
or another pointed object to press the button.
Figure 9. Reset Button
WARNING
Do not press the reset button for more than 5 seconds. Doing so will cause the LPS-20x to revert
to the factory defaults.
CAUTION
Resetting the LPS-20x deletes all your configuration settings, resets the Administrator username
and password to ‘admin’ , and sets the Wireless port and LAN port IP address to 192.168.1.1.
The management tool can also be used to restart or reset the LPS-20x.
Reset
20A-LPS20xR1
Button