User's Manual Part 1

SCP-LPS20x-011-012-01H December 20, 2004
20 ADC Telecommunications, Inc.
MOUNTING THE UNIT
OPEN THE UNIT
Figure 4. Main Access Door
Step Action
1 Use the two No. 10 x 1.5-inch wood screws and flat washers provided in the Mounting Kit to attach the
unit to the side of the wall or pole (Figure 4).
2 For mounting on stucco or other similar surfaces, use the two No. 10 x 1-inch anchors from the kit.
Mount the unit as shown in Figure 4, with all access openings facing down. Refer to Table 6 on page 8 for
dimensions.
Step Action
1 You have full access to the interior of the unit by loosening the tamper proof screw from the front cover
(Figure 4).
The tamper proof screw requires a 5/32-inch drilled hex key. The tamper proof screw is preferred for
improved security.
2 Push in the main access latch and open the cover.
Mounting Hole
Mounting Hole
Main Access Latch
12A-LPS20xR1
Tamper Proof
Screw