User's Manual

InterReach picoBTS Installation Guide Page 17
© 2008, ADC Telecommunications, Inc.
ADCP-77-061 • Issue A • 08/2008 • Chapter 2 - Installation
WARNING: All RF cabling must be completed with the chassis powered off and, preferably, with the
power cable disconnected from the cabinet.
Do not disconnect RF coaxial connectors on the ADC equipment or antenna systems while the radio
equipment is operating.
Never place any body part over or look into any RF connector while the radio
equipment is transmitting.
RF signal levels that give rise to hazardous radiation levels can exist within the transmitter, power
amplifiers, associated RF multiplexers and antenna systems.
Preliminary