User's Manual

InterReach picoBTS Installation Guide Page 11
© 2008, ADC Telecommunications, Inc.
ADCP-77-061 • Issue A • 08/2008 • Chapter 2 - Installation
3 Carefully mount and secure the picoBTS using customer-provided rack screws, as shown
in Figure 2-2
4 If you are mounting an InterReach Unison or Fusion DAS hub, use the same procedure to
align and mount the unit directly above or below the picoBTS in the rack using
customer-provided screws. Figure 2-3 shows a DAS hub mounted in a rack with a
picoBTS.
5 You have completed the hardware installation, proceed to the next section to continue the
picoBTS connections.
Figure 2-2: picoBTS Rack Mount
Note: Ensure that all rack mount screws are securely tightened.
Figure 2-3: picoBTS and DAS Mounting Location
Preliminary