User's Manual
Table Of Contents
- InterReach picoBTS Installation and Commissioning Guide
- TABLE OF CONTENTS
- Chapter 1 - Unpacking and Configuration Verification
- Chapter 2 - Installation
- Chapter 3 - Commissioning and Configuration
- Chapter 4 - On-Line Testing
Page 2 InterReach picoBTS Installation Guide
© 2008, ADC Telecommunications, Inc.
ADCP-77-061 • Issue A • 08/2008 • Chapter 1 - Unpacking and Configuration Verification
1.1 UNPACKING AND INSPECTING
The InterReach picoBTS is packed with great care, and all containers are inspected prior to
shipment. Upon receipt of these packages, immediately inspect the outside of the shipping
containers. If there is any visible damage, insist that a representative of the carrier be present
when unpacking the contents.
Carefully inspect the system as it is unpacked. If any damage such as dents or broken connec-
tions is noticeable, immediately notify the carrier as well as ADC Customer Service.
Store the shipping containers for future use. If the unit has to be returned for upgrade or
service, the specially designed shipping containers assure adequate protection for the equip-
ment. If for some reason the containers are not reusable or if they are misplaced, please contact
ADC to order new containers.
1.1.1 UNPACKING AND INSPECTING THE PICOBTS
The InterReach picoBTS is shipped in a specially designed shipping box. The system should
remain in the packaging until shipped to its final destination.
• Open shipping box and remove the picoBTS chassis.
• Note part numbers on the back of the unit correspond to the shipping documentation.
Carefully inspect the system as it is unpacked. If any damage such as dents or broken connec-
tions is noticeable, immediately notify the carrier as well as ADC Customer Service.
Store the shipping containers for future use. If the unit has to be returned for upgrade or
service, the specially designed shipping containers assure adequate protection of the equip-
ment. If for some reason the containers are not reusable or if they are misplaced, please contact
ADC to order new containers.
The picoBTS shipment will include the following items:
• picoBTS chassis
• Mounting brackets
• Eight mounting bracket screws
If you have ordered an InterReach distributed antenna system, it will be shipped in a separate
container. Please refer to the Quick Start Guide and packing slip included with its shipment.
Preliminary