User's Manual

ADCP-75-246 • Issue 1 • 6/2008
Page 20
© 2008, ADC Telecommunications, Inc.
Figure 10. Connecting Grounding Cable to Enclosure
6.3 Network Listen Antenna Installation
The microBTS is shipped with either a Network Listen antenna. Install the antenna by threading
it onto the NMO connector located on the top of the microBTS as shown in Figure 11. Tighten
antenna by hand until secure.
Figure 11. Network Listen Antenna Installation
GROUND
L
UG
FLAT
WASHER
SOCKET
SCREW
22642-A
22650-A
NETWORK LISTEN
ANTENNA