User's Manual

ADCP-75-246 • Issue 1 • 6/2008
Page 4
© 2008, ADC Telecommunications, Inc.
Figure 2. 2x1 microBTS User Interface
Table 1. 2x1 microBTS User Interface
REF
NO
USER INTERFACE
DESIGNATION
DEVICE
FUNCTIONAL
DESCRIPTION
1 No designation NMO female RF
connector
Connection point for the Network Listen
antenna.
2 Ground symbol Threaded hole with
hex socket screw
Connection point for the grounding wire.
3 Antenna symbol N-type female RF
coaxial connector
Connection point for the base station antenna
cable.
4 Network symbol Sealed RJ-45 female
connector
Connection point for the IP backhaul cable.
5 No designation Red LED
(off/red)
Indicates if the microBTS is powered and normal
(off) or if a major fault is detected (red).
6 115/230 VAC
47–63 Hz
6.8 AMP
Sealed 3-wire AC
power connector
Connection point for the AC power cord.
22589-A
(5) LED
INDICATOR
TOP VIEW BOTTOM VIEW
(1) NETWORK LISTEN
ANTENNA CONNECTOR
(4) IP BACKHAUL
CABLE CONNECTOR
(2) GROUNDING WIRE
CONNECTION POINT
(6) AC POWER
CONNECTOR
NOTE: SHOWN WITH DUST CAPS REMOVED
(3) BASE STATION
ANTENNA
CONNECTOR