User's Manual

COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and

_Regulatory_Information.doc

- 6 -

3 Model 109 POWER SUPPLY

3.1 109 - Handbook - Warnings and Cautions

This document is written in English, please request a copy in your local

language if required.

This product is only intended to power products approved by IP Access.

Ensure that only IP Access products are connected to an Ethernet circuit

enabled for 48V operation, this also applies to outlets remote from the unit

For indoor use only, output cabling is SELV / LAN for indoor routing only.

Do not cover casing or otherwise impede cooling.

Do not apply power to unit if there is any evidence of condensation.

Do not open casing as mains voltages may be present within the unit.

90 to 264VAC input is via a 2 pin IEC C7 (figure 8) connector. Inlet cable

assembly must carry a suitable local approval (e.g. UL marked for US and

Canadian markets).

PSU109 – Environmental Specification

• -10 to +45 degrees Centigrade ambient operating temperature.

• This product has been Listed by UL for use in a 25 degree C ambient.

• -20 to +80 degrees C ambient storage temperature.

• 5 to 95% RH non condensing humidity.