User's Manual

© ip.access Ltd
COMPANY CONFIDENTIAL CENG0133_C_Customer_Safety_and
_Regulatory_Information.doc
- 16 -
5.3.1 NanoBTS - Handbook - Installing the PSU at the Ethernet switch.
If the 109 PSU is located at the patch panel /output port of the Ethernet switch, it
is important that the 109 PSU is connected exactly as illustrated below (failure to
do so may cause damage to the switch). Ensure that the 109 PSU is placed in a
location that is ventilated and that the connection leads provide no safety hazard.
~
PSU
48Vdc
4
8V
d
c
!
110-230Vac
RJ45
Connection to LAN
Connection to nanoBTS
Cable to nanoBTS
Ethernet Switch
5.3.2 Nano - BTS Handbook - Installing the PSU at the nanoBTS.
Ensure that the 109 PSU is placed in a location that is ventilated and that the
connection leads provide no safety hazard.
RJ45
Connection to LAN
~
PSU
48Vdc
4
8
V
d
c
!
110-230Vac
Connection to nanoBTS