User Manual

FlexWave microBTS Installation and Commissioning Guide Page 61
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Chapter 5 - microBTS Initial Configuration
10 A Create TRX screen will appear. Refer to Figure 5-21.
11 Fill in the dialog boxes with the information appropriate to your system. Refer to
Table 5-2.
E
12 Once this information is added.
13 Click Finish to complete the process of adding a slave TRX.
Table 5-3: Configuration Parameters
Parameter Variable
nanoBTS Hardware Class
From this pull-down menu, select the type of TRX(s)
installed in the microBTS
Radio Carrier Name
Select a Radio Carrier Name according to the needs of
your network
Baseband Transceiver Name
Select a Baseband Transceiver Name according to the
needs of your network
TRX Number In a 2 TRX system the Master = 0, the Slave = 1.
Figure 5-21: Create TRX Screen
AD079902