User Manual

Page 60 FlexWave microBTS Installation and Commissioning Guide
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Chapter 5 - microBTS Initial Configuration
6 Once all of the above items are configured, click Finish and a new BTS site will be
created.
7 A new site will appear in the configuration “tree.”
Note: For 2 x 1 configured microBTS a “slave TRX” must be added.
8 Right click on the site object and select Create from the pull-down menu.
9A Create BTS Child Object screen will appear. Select Create TRX objects and click on
OK. Refer to Figure 5-20.
BTS Name
Select a BTS name that is associated to the site name in
your network
Frequency Band
Select the appropriate frequency band from the
pull-down menu
MCC
Select an AFRCN channel number according to the
needs of the network
MNC Per network requirement
Location Area Code (LAC) Per network requirement
Cell Identity Per network requirement
PLMN-CC Per network requirement
BS-CC Per network requirement
Figure 5-20: Create BTS Child Object Screen
Table 5-2: Configuration Parameters
Parameter Variable
AD079901