User Manual

FlexWave microBTS Installation and Commissioning Guide Page 59
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Chapter 5 - microBTS Initial Configuration
4 A new site must be created for the microBTS configured in the previous sections. Right
click on Sites and select
Create. A Create SITE dialog box will appear as shown in
Figure 5-19.
5 A number of parameters will need to be input in the Create SITE dialog box as shown in
Table 5-2:
E
Figure 5-19: Creating a New Site
Table 5-2: Configuration Parameters
Parameter Variable
BTS Class
From this pull-down menu, select the type of TRX(s)
installed in the microBTS
Site Name
Select a site name according to the needs of your
network
Site Indentifier
This number is normally assigned by a network admin-
istrator depending upon the needs of the network. The
number must be unique to each site and can not be
duplicated within a network.
AD069905