User Manual

Page 94 FlexWave microBTS Installation and Commissioning Guide
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Appendix A - Software Upgrade Procedure
The following output will appear:
adc.GIF
hcp
hcpInstall
microBTS
updatePod
50 At the command prompt enter:
./hcpInstall
The following output will appear:
ln: `/var/www/index.html': File exists
Stopping hardware control process: hcp.
51 At the command prompt enter:
hcp -v
This will display the version number of the software upgrade loaded in this procedure. For
example:
hcp: version 4.0.1.x
52 This completes the manual upgrade procedure. Verify the new software is loaded by
closing the PuTTY window and launching BTS Installation Manager.
53 Select Connect to BSC from the task bar.
54 Enter the IP address of the BSC and click OK. Refer to Figure A-26.