User Manual
Table Of Contents
Page 58 FlexWave microBTS Installation and Commissioning Guide
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Chapter 5 - microBTS Initial Configuration
2 After the BSC Configuration Manager is launched, a connection screen will appear as
shown in Figure 5-17. Type in the IP address of the BSC you wish to communicate with.
Enter the password and click OK.
3 A “tree” representation of your network will appear as shown in Figure 5-18. Click on the
sites + symbol. This will show each BTS site on your network.
Figure 5-17: Connecting to the BSC screen
Figure 5-18: Reviewing the BTS Sites on the Network
AD069902
AD069903
Click on the
Sites “+”Symbol
To Reveal the
BTS Sites on
the Network