User Manual

FlexWave microBTS Installation and Commissioning Guide Page 87
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Appendix A - Software Upgrade Procedure
4 Confirm that the MAC addresses shown match those shown on the exterior label of the
microBTS. The IP address for the micro controller is normally one digit higher than the
highest IP address of the nano TRX’s. In the sample shown, the highest nano TRX is
172.16.79.15. It is likely that the micro controller address will be 172.16.79.16. Record
this number for use in the next step.
5 Use the IP address from the previous step to launch the WinSCP session in the next step. If
the IP address does not work, use Wireshark, Angry IP or similar IP discovery tool to
obtain the micro controller IP address.
6 Launch a WinSCP session from the PC desktop and the WinSCP Login screen will
appear. Refer to Figure A-21.
7Enter the Host name which is the IP address assigned to the micro controller unit of the
microBTS being upgraded.
8Enter
root in the User name dialog box, and your password in the Password dialog box.
9 Click on Login when complete.
Figure A-20: Select nanoBTS Screen Showing the MAC and IP Addresses for the nano TRX’s
172.16.79.14
172.16.79.15
00:02:95:00:42:17
00:02:95:00:42:AD
1/0/0
2/0/0
AD098902