User Manual

Page 86 FlexWave microBTS Installation and Commissioning Guide
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Appendix A - Software Upgrade Procedure
A.3 Upgrade Procedure for Micro Controller Software 3.2.x to Version 4.0.1.x.
Use the following “manual” upgrade procedure to upgrade microBTS controller software from
version 3.2.x to 4.0.1.x.
1 3.2.x versions of the micro controller software will not display IP or MAC addresses on
the BTS Installer Utility. The MAC and IP addresses for the micro controller can be found
using the following methods:
2 Launch the BTS Installer Utility as shown in Figure A-19 and click on the Find button.
3A Select nanoBTS screen will appear. The MAC and IP addresses of the nano TRX’s
with in the microBTS will be shown. Refer to Figure A-20.
Figure A-19: Selecting Find on the BTS Installer Utility
AD098901