User Manual

FlexWave microBTS Installation and Commissioning Guide Page 83
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Appendix A - Software Upgrade Procedure
ln: `/var/www/index.html': File exists
Stopping hardware control process: hcp.
16 To change directories enter:
cd ..
17 At the command line enter:
hcp -v
This will display the version number of the software upgrade loaded in this procedure. For
example:
hcp: version 4.0.1.9
18 This completes the manual upgrade procedure. Verify the new software is loaded by
Closing the PuTTY window and launching BSC Configuration Manager. Select Connect
to BSC from the task bar. Enter the IP address of the BSC and click OK. Refer to
Figure A-16.
19 Right click on the FlexWave Manager object and select Properties. The FlexWave
Manager Properties screen will appear. Verify that the nanoBTS Software Version
dialog box contains the updated software version number. Refer to Figure A-17.
Figure A-16: Connect to BSC Screen
AD091907