User Manual

Page 78 FlexWave microBTS Installation and Commissioning Guide
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Appendix A - Software Upgrade Procedure
will
21 The microBTS is now upgraded with the new software load. The site can now be returned
to normal operation.
A.2.2 Manual Upgrade Procedure
Upgrading of the micro controller software can be done using a procedure using linux
commands to accomplish the upgrade task. The manual upgrade method should only be used
when circumstances preclude the use of the “automatic” upgrade and should be performed by
an experienced linux operator. Use the following step-by-step procedures:
1 Launch a WinSCP session from the PC desktop and the WinSCP Login screen will
appear. Refer to Figure A-12.
2 Enter the Host name which is the IP address assigned to the micro controller unit of the
microBTS being upgraded.
3Enter
root in the User name dialog box, and your password in the Password dialog box.
Click on Login when complete.
Figure A-11: Activating the nanoBTS Software From the BSC Configuration Manager Main Screen
AD091910