User Manual

FlexWave microBTS Installation and Commissioning Guide Page 77
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Appendix A - Software Upgrade Procedure
15 Return to the BSC Configuration Manager screen and find the BTS upgraded on the
configuration “tree.”
16 Right click on the site and select Properties. The microBTS Properties screen will
appear (this may take up to 10 minutes) showing the Active Software Version and the
Standby Software Version.
17 Confirm the Standby Software Version is the version loaded on this procedure. After
determining it is correct, Click OK. Refer to Figure A-10.
will
18 Return to the BSC Configuration Manager main screen and select BSC Control from the
menu bar as shown in Figure A-11.
19 With the FlexWave Manager Object still selected, select Activate nanoBTS Software
from the drop down menu.
20 When prompted to activate the new software click OK.
Figure A-10: microBTS Properties Screen Confirming the Active and Standby Software Loads
4.0.1.9
AD091909