User Manual
Table Of Contents
FlexWave microBTS Installation and Commissioning Guide Page 75
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Appendix A - Software Upgrade Procedure
10 At the command line, type the following commands:
cp /root/FWBSSCtrl_4.0.x.x.gz .
ls -l
Refer to Figure A-7.
11 Close the PuTTY window and launch BTS Configuration Manager.
12 Select Connect to BSC from the task bar.
13 Enter the IP address of the BSC and click OK. Refer to Figure A-8.
Figure A-7: PuTTY Login Screen
AD091906