User Manual

FlexWave microBTS Installation and Commissioning Guide Page v
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Preface
About This Manual
Welcome to the FlexWave microBTS Installation and Commissioning Guide
. It describes how
to perform local installation and commissioning of the microBTS at the customer’s site.
This document is intended for an ADC trained field service engineer (FSE) or operator who
performs local installation and commissioning at the customer’s site. The FSE or operator
should be equipped with the necessary tools for installation and commissioning, and a basic
understanding of the GSM cellular network. The FSE or operator should also be familiar with
the use of the Craft PC and procedures conducted using the Craft PC.
ADC assumes that pre-installation project planning has occurred, and is documented via a site
survey report. This site survey should include items such as the location of antennas, chassis,
power connections and other interface accesses and temperature control equipment.
Related Publications
Listed below are related manuals, their content, and their publication numbers. Copies of these
publications can be ordered by contacting the Technical Assistance Center at 1-800-366-3891,
extension 73476 (in U.S.A. or Canada) or 952-917-3476 (outside U.S.A. and Canada).
Mobile Network Solutions Documentation Index ADCP-76
United States Federal Communications Commission Required User Information
Located on the equipment is a label that contains, among other information, the FCC registra-
tion number. If requested, this information must be provided to the telephone company.
The UltraWAVE BTS Series AUAC series complies with Part 22 of the FCC Rules.
The 1900 MHz WAVEXpress Series M50 complies with Part 24 of the FCC Rules.
The WAVE2000 BS Plus 800 MHz complies with Part 22 of the FCC Rules.
The WAVE2000 Pico BS Plus (800 MHz and 1900 MHz) comply with Part 22 and Part 24 of
the FCC Rules and UL 1950 safety certification.
This equipment cannot be used on the telephone company-provided coin service. Connection
to Party Line Service is subject to State Tariffs.
If this equipment causes harm to the telephone network, the telephone company will notify
you in advance that temporary discontinuance of service may be required. If advance notice
isn't practical, the telephone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, of proce-
dures that could affect the operation of the equipment. If this happens, the telephone company
will provide advance notice in order for you to make the necessary modifications in order to
maintain uninterrupted service.
Title/Description ADCP Number