User Manual

Page 54 FlexWave microBTS Installation and Commissioning Guide
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Chapter 5 - microBTS Initial Configuration
19 Select the DHCP tab on the BTS Configuration screen.
Enable DHCP Configuration and set the Subnet Mask in a range of your network settings.
for example: 255. 255. 240. 0. Refer to Figure 5-14. Click OK when complete.
20 Repeat Step 18 through Step 19 in this procedure for each of MAC addresses in the
microBTS being installed.
21 The DHCP server will assign addresses to each unit within the microBTS. This can be
verified by reviewing the main menu screen or the DHCP Pool screen as shown in
Figure 5-11.
Figure 5-14: Enabling DHCP and Setting the Subnet Mask Using the DHCP Tab
AD077906