User Manual
Table Of Contents
- FlexWave microBTS 1 x 1 and 2 x 1 Installation and Commissioning Guide
- Chapter 1 - Introduction
- Chapter 2 - Unpacking and Inspection
- Chapter 3 - Mounting Procedures
- Chapter 4 - Installation Procedures
- 4.1 Installation Overview
- 4.1.1 Installation Hardware Provided with microBTS Enclosure
- 4.1.2 Tools and Materials Required
- 4.1.3 Ground Wire Installation
- 4.1.4 Network Listen Antenna Installation
- 4.1.5 IP Backhaul Cable Installation
- 4.1.6 Base Station Antenna Cable Installation
- 4.1.7 AC Power Wiring Installation
- 4.1.8 DC Power Wiring Installation
- 4.1.9 Touch-Up Painting
- 4.1.10 Shield Installation (option)
- 4.2 microBTS Replacement
- 4.1 Installation Overview
- Chapter 5 - microBTS Initial Configuration
Page 48 FlexWave microBTS Installation and Commissioning Guide
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Chapter 5 - microBTS Initial Configuration
Figure 5-7: Exterior Model Label Showing the MAC Addresses for the microBTS and Each TRX
Cust Service (800) 366-3891 Ext 73475
Cat# FWB-MBTS-B10N00
PN 1459911-11
SN 224319802
900 MHZ
Made in USA
SC 85
0309
PAT 5,627 ,879 5,657 ,374 5,644, 622 5,642,405 5,621, 786 5,852, 651
00:02:95:00:4B:3A
XX:XX:XX:XX:XX:XX
XX:XX:XX:XX:XX:XX
XX:XX:XX:XX:XX:XX
00:0B:AB:15:E9:45
Product Indentification Label (Sample)
MAC Address Label (Sample)
MAC Address
microBTS
MAC Address
nanoBTS
AD019904
microBTS Serial
Number
COMMUNICATION SERVICE
EQUIPMENT
This equipment provides the degree
of protection specified by IP67 in
accordance with IEC Publication 529
Certification Label (Sample)