User Manual
Table Of Contents
- FlexWave microBTS 1 x 1 and 2 x 1 Installation and Commissioning Guide
- Chapter 1 - Introduction
- Chapter 2 - Unpacking and Inspection
- Chapter 3 - Mounting Procedures
- Chapter 4 - Installation Procedures
- 4.1 Installation Overview
- 4.1.1 Installation Hardware Provided with microBTS Enclosure
- 4.1.2 Tools and Materials Required
- 4.1.3 Ground Wire Installation
- 4.1.4 Network Listen Antenna Installation
- 4.1.5 IP Backhaul Cable Installation
- 4.1.6 Base Station Antenna Cable Installation
- 4.1.7 AC Power Wiring Installation
- 4.1.8 DC Power Wiring Installation
- 4.1.9 Touch-Up Painting
- 4.1.10 Shield Installation (option)
- 4.2 microBTS Replacement
- 4.1 Installation Overview
- Chapter 5 - microBTS Initial Configuration
ADCP-77-086 • Issue 2 • 04/2009 • Introduction
FlexWave microBTS Installation and Commissioning Guide Page iii
© 2009, ADC Telecommunications, Inc.
Declarations of Conformity
Declaration of Conformity
With regard to the R&TTE Directive 1999/5/EC
Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101
World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com
Manufacturer’s Name: ADC Telecommunications, Inc.
Manufacturer’s Address: Mailing Address: P.O. Box 1101
Minneapolis, Minnesota 55440-1101 USA
Declares that this product:
Product Name: FlexWave™ 1800 MHz microBTS
Product Description: Wireless Network System
Model Name(s): FWB-MBTS-C20N00
Complies with appropriate essential requirements of the Article 3 of the R&TTE Directive:
Standards to which the conformity is declared:
Protection to Health and Safety: Directive: 2006/95/EC (previously 73/23/EEC)
Protection with respect to EMC: Directive: 2004/108/EC (previously 89/336/EEC)
EMC: ETSI EN 301 489-1, 8 V1.4.1 (2002-8)
Health & Safety: IEC 60950-1 (1
st
Edition): (2001-7)
Radio: ETSI EN 301 502 V8.1.2 (2001-7)
Name of authorized person: Mark Miska
Position: Compliance Engineer
Date of Issue: 7/18/2008 Signature
Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101
World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com
EC Declaration of Conformity
Under R&TTE Directive 1999/5/EC
Manufacturer Name : ADC Telecommunications, Inc.
Address : 541 E Trimble Road
San Jose, CA 95131, U.S.A.
Declares that the product InterReach PicoBSS
Product Description : Wireless Network System
Model Number : ADCIR-BSS-xxxx
(x = 0-9)
Complies with appropriate essential requirements of the Article 3 of the R&TTE directive.
Standard to which conformity is declared :
Protection to Health and Safety: Directive: 73/23/EEC
Protection with respect to EMC: Directive: 89/336/EEC
EMC: ETSI EN 301 489-1, 8 V1.4.1 (2002-8)
Safety: EN 60950-1:2001+A11
Radio: ETSI EN 301 502 V8.1.2 (2001-7)
Name of authorized person; Mark Schutzer
Position: Director, Hardware Engineering
Date: 8/12/2008 Signature
Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101
World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com
EC Declaration of Conformity
Under R&TTE Directive 1999/5/EC
Manufacturer Name : ADC Telecommunications, Inc.
Address : 541 E Trimble Road
San Jose, CA 95131, U.S.A.
Declares that the product Ultrawave Micro BTS/BSPlus System
Product Description : Wireless Network System
Model Number : MBTS-xxxx/MBSS-xxxx
(x = 0-9)
Complies with appropriate essential requirements of the Article 3 of the R&TTE directive.
Standard to which conformity is declared :
Protection to Health and Safety: Directive: 73/23/EEC
Protection with respect to EMC: Directive: 89/336/EEC
EMC: ETSI EN 301 489-1, 8 V1.4.1 (2002-8)
Safety: EN 60950-1:2001+A11
Radio: ETSI EN 301 502 V8.1.2 (2001-7)
Name of authorized person; Mark Schutzer
Position: Director, Hardware Engineering
Date: 8/12/2008 Signature
Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101
World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com
EC Declaration of Conformity
Under R&TTE Directive 1999/5/EC
Manufacturer Name : ADC Telecommunications, Inc.
Address : 541 E Trimble Road
San Jose, CA 95131, U.S.A.
Declares that the product Ultrawave NIB System
Product Description : Wireless Network System
Model Number : UNIB-xxxx
(x = 0-9)
Complies with appropriate essential requirements of the Article 3 of the R&TTE directive.
Standard to which conformity is declared :
Protection to Health and Safety: Directive: 73/23/EEC
Protection with respect to EMC: Directive: 89/336/EEC
EMC: ETSI EN 301 489-1, 8 V1.4.1 (2002-8)
Safety: EN 60950-1:2001+A11
Radio: ETSI EN 301 502 V8.1.2 (2001-7)
Name of authorized person; Mark Schutzer
Position: Director, Hardware Engineering
Date: 8/12/2008 Signature