User Manual

FlexWave microBTS Installation and Commissioning Guide Page 9
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Chapter 1 - Introduction
damage to electronic components should a lightning strike occur. The lighting protector surge/
antenna port is an N-type female connector. Lightning protectors are available in two versions:
1.) Lightning arrestor, N-type male to N-type female, catalog number DGVX-LAP1MS1F1.
2.) Lightning arrestor, N-type male to DIN female, catalog number DGVX-LAP1MS2F1.
1.3.4 Solar Shields
A solar shield kit is available if the microBTS must be mounted in full sunlight for extended
periods of time with extremely high ambient temperatures. The solar shields attach to the
exterior of the microBTS enclosure and shade the enclosure from direct exposure to the sun.
The solar shields are constructed of sheet metal and are painted to match the color of the enclo-
sure. All fasteners and brackets required are provided with the kit. The solar shield kit can be
ordered using catalog number DGVC-00000SS2.
1.3.5 Hardened RJ-45 Drop Cables
Hardened RJ-45 drop cables of various lengths can be ordered. Refer to Table 1-3.
E
1.3.6 AC and DC Power Cords
Power cords suitable for both AC and DC applications are available in various lengths. The
microBTS is supplied with one 15 ft. AC/ DC power cable as standard. Refer to Table 1-4 for
the optional lengths available.
E
Table 1-3: Hardened RJ-45 Cable Options
Cable Length Catalog Number
20 ft. FWB-MACC-RJ45020B
60 ft. FWB-MACC-RJ45060B
100 ft. FWB-MACC-RJ45100B
Table 1-4: AC/DC Power Cable Options
Cable Length Catalog Number
40 ft. DGVX-SCSPWR020
60 ft. DGVX-SCSPWR060
100 ft. DGVX-SCSPWR100