User Manual

Page 8 FlexWave microBTS Installation and Commissioning Guide
© 2009, ADC Telecommunications, Inc.
ADCP-77-086 • Issue 2 • 04/2009 • Chapter 1 - Introduction
1.3 Accessory Items and Catalog Numbers
This section provides the base catalog numbers for the microBTS product line and a descrip-
tion of the accessory items that are available separately for the microBTS. The accessory items
may or may not be required depending on the application. For sales or further information on
accessories available for the microBTS refer to the last page of this manual to contact ADC.
1.3.1 Catalog Numbers for the microBTS
Should service or spare parts be required for the microBTS, refer to Figure 1-3 which provides
information on the type of microBTS and the options it is equipped with.
1.3.2 Strand Mount Kit
A strand-mount kit is available if the application requires that the microBTS be mounted from
a horizontal cable system. Mounting pads are provided on the side of the enclosure for
securing a pair of cable-attachment clips. Screws are used to secure the cable-attachment clips
to the enclosure. All fasteners required for installation are provided with the kit. The Strand
Mount can be ordered using catalog number DGVC-STRNDKIT.
1.3.3 Lightning Protector
An external lightning protector is available separately for the microBTS. It is recommended
that a lightning protector be installed at the base station antenna port to reduce the chance of
Figure 1-3: microBTS Catalog Numbering Structure
FWB-MBTS-
Frequency
A = 850 MHz
B = 900 MHz
C = 1800 MHz
D = 1900 MHz
TRX Count
1
2
3
4
Place Holder
Default = 0
Connector
Type
N = Type N
DC Power
No = 0
Yes = 1
Place Holder
Default = 0
Example: A 4 TRX 1800 MHz microBTS With N-Type Connector Operating on AC Power
= FWB-MBTS-C40N00
AD105901