User's Manual Part 2
Table Of Contents
- SECTION 7 Installing Fusion
- SECTION 8 Replacing Fusion Components
- SECTION 9 Maintenance, Troubleshooting, and Technical Assistance
- APPENDIX A Cables and Connectors
- A.1 75 Ohm CATV Cable
- A.2 Fiber Optical Cables
- A.3 Coaxial Cable
- A.4 Standard Modem Cable
- A.5 TCP/IP Cross-over Cable
- A.6 DB-25 to DB-9 Null Modem Cable
- APPENDIX B Compliance
- B.1 Fusion System Approval Status
- B.2 Human Exposure to RF
- APPENDIX C Faults, Warnings, Status Tables
- C.1 Faults Reported by Fusion Main/SingleStar Hubs
- C.2 Faults Reported for System CPU
- C.3 Faults for Fusion Expansion Hubs
- C.4 Faults for RAUs
- C.5 Warning/Status Messages for Fusion Main/SingleStar Hubs
- C.6 Warning/Status Messages for System CPUs
- C.7 Warning/Status Messages for Fusion Expansion Hubs
- C.8 Warning /Status Messages for RAUs
Help Hot Line (U.S. only): 1-800-530-9960 7-33
D-620610-0-20 Rev A
CONFIDENTIAL
Fusion Installation Procedures
Windows XP
1.
Click
Start>Settings>Network Connections>Local Area Connection
. The win-
dow shown in Figure 7-12 appears.
Figure 7-12
Local Area Connection Properties Window
2.
In the
This connection uses the following items
, scroll down to and select
Internet Protocol (TCP/IP)
and click
Properties
.
3.
Perform steps 3 through 8 in the preceding section.
Using AdminBrowser
1.
Launch your web browser, type
Https://192.168.0.100
in the URL line, and click
Go
.
2.
When AdminBrowser appears, log in using the default password: password.