User's Manual Part 1
Table Of Contents
- SECTION 1 General Information
- SECTION 2 InterReach Fusion System Description
- SECTION 3 Fusion Main Hub
- SECTION 4 Fusion Expansion Hub
- SECTION 5 Remote Access Unit
- SECTION 6 Designing a Fusion Solution
Help Hot Line (U.S. only): 1-800-530-9960 4-3
D-620610-0-20 Rev A
CONFIDENTIAL
Expansion Hub Front Panel
4.2 Expansion Hub Front Panel
Figure 4-3
Expansion Hub Front Panel
1.
One port LED per type F connector port for link status and downstream RAU sta-
tus (8 pair total).
2.
Eight CATV cable, type F connectors (labeled
PORT 1
,
2
,
3
,
4
,
5
,
6
,
7
,
8
)
3.
One pair of unit status LEDs
• One LED for unit power status (labeled
POWER
)
• One LED for unit status (labeled
E-HUB STATUS
)
4.
One set of fiber connection status LEDs
• One LED for fiber downlink status (labeled
DL STATUS
)
• One LED for fiber uplink status (labeled
UL STATUS
)
5.
One fiber optic port which has two connectors
• One standard female SC/APC connector for MMF/SMF output (labeled
UPLINK
)
• One standard female SC/APC connector for MMF/SMF input (labeled
DOWNLINK
)
6.
One 9-pin D-sub male connector for LGC factory testing (labeled
CONSOLE
)
7.
One RJ-45 female connector for system communication and diagnostics using a
PC/laptop with direct connect or using a LAN switch (labeled
ADMIN/LAN
)
8.
Power Switch
1 2 3 4 5
8
6
7