User's Manual

Fusion Wideband Expansion Hub
Page 50 InterReach Fusion Wideband Installation, Operation, and Reference Manual
© 2015 TE Connectivity D-620616-0-20 Rev K • TECP-77-044 Issue 9 • March 2015
EXPANSION HUB SPECIFICATIONS
Table 38. Expansion Hub Specifications
Specification Description
Enclosure Dimensions (H
× W × D) 89 mm x 438 mm x 381 mm
3.5 in. x 17.25 in. x 15 in.
2U
Weight < 6.6 kg
< 14.5 lb.
Operating Temperature 0° to +45°C
+32° to +113°F
Non-operating Temperature –20° to +85°C
–4° to +185°F
Operating Humidity, non-condensing 5% to 95%
CATV Connectors
(a)
8 F, female (CATV - 75 Ohm)
Fiber Connectors
(b)
1 Pair, SC/APC
LED Alarm and Status Indicators Unit Status (1 pair):
•POWER
•
E-HUB STATUS
Fiber L
ink Status (1 pair):
•
DL STATUS
• U
L STATUS
Port Status (1 pair per CATV port):
•Link/RAU
External Alarm Connector (contact
sense
monitor)
1 9-pin
D-sub, female
AC Power (Volts) (47–63 Hz) Rating: 100/240V AC, 6A, 50-60 Hz
Operating Range: 90-132V AC/170-250V AC auto-ranging
Power Consumption (W) 4 RAUs: 290 typical, 360 maximum
8 RAUs: 500 typical, 630 maximum
MTBF 54,477 hours
a It is important that you use only recommended CATV 75
Ohm cable with quality
F connectors.
b It is critical to system performance that only SC/APC fiber connectors
are used throughout the fiber network,
including fiber distribution panels.