User Manual

Fusion Wideband Main Hub Front Panel

3-4 InterReach Fusion Wideband Installation, Operation, and Reference Manual

CONFIDENTIAL

D-620616-0-20 Rev G

3.2 Fusion Wideband Main Hub Front Panel

Figure 3-3 Fusion Wideband Main Hub Front Panel

InterReach

Wideband Fusion

Main Hub

1. Four fiber optic ports (labeled PORT 1, PORT 2, PORT 3, PORT 4)

• One standard female SC/APC connector per port for MMF/SMF input (labeled

UPLINK)

• One standard female SC/APC connector per port for MMF/SMF output

(labeled DOWNLINK)

2. Four sets of fiber port LEDs (one set per port)

• One LED per port for port link status and downstream unit status

3. One set of unit status LEDs

• One LED for unit power status (labeled POWER)

• One LED for unit status (labeled MAIN HUB STATUS)

4. One 9-pin D-sub male connector for system remote dial-up communication and

diagnostics using a modem (labeled MODEM)

5. One RJ-45 female connector for system communication and diagnostics using a

PC/laptop with direct connect or using a LAN switch (labeled ADMIN/LAN)

6. Power switch

NOTE: The Fusion Wideband One Port Main Hub (PNs:

FSN-W1-MH-2-1P, FSN-W2-MH-3-1P, FSN-W3-MH-1P, and

FSN-W4-MH-1P) configuration is a cost reduced version of the Fusion

Wideband Main Hub and supports only one Expansion Hub (up to 8 RAUs).