User Manual

Help Hot Line (U.S. only): 1-800-530-9960 2-9
D-620616-0-20 Rev G CONFIDENTIAL
System Specifications
2.6 System Specifications
Table 2-1 Physical Specifications
Parameter Main Hub Expansion Hub
Remote Access
Unit
IF/RF Connectors
4-type N, female
a
(50 Ohm),
1 Downlink/Uplink pair per band
8-type F, female (CATV 75 Ohm) One F, female
(CA
TV -75 Ohm)
One N, female
b
(antenna - 50 Ohm)
External Alarm Connector
(contact source)
One, 9-pin D-sub, female One, 9-pin D-sub, female —
ADMIN/LAN Interface
Connectors
One RJ-45, female
One 9-pin D-sub, male for
optional modem
One RJ-45, female
One 9-pin D-sub, male
—
Fiber Connectors
c
4 pair, SC/APC
d
One pair, SC/APC —
LED Alarm and Status
Indicators
Unit Status (One pair):
• Power
• Main Hub Status
Downstream Unit Status
(One per fiber port):
• Expansion Hub/RAU
Unit Status (One pair):
Power and Expansion Hub Status
Fiber Link Status (One pair):
DL Status and UL Status
Port Status:
One per F connector port and
Link/RAU
Unit Status (One
pair):
• Link
• Alarm
Power (AC Option) Rating: 100–240V AC, 1A,
50–60 Hz
Operating Range: 90–132V
AC/170-250V AC
auto-ranging
Rating: 100–240V AC, 6A,
50–60 Hz
Operating Range: 90–132V
AC/170-250V AC auto-ranging
—
Power (DC Option) Rating: 38–64V DC, 2.5A Rating: 38-64V DC, 14A —
Power Consumption (W) 30 4 RAUs: 290 typical, 360 Max.
8 RAUs: 500 typical, 630 Max.
—
Enclosure Dimen-
sions
e
(H
uWuD) (Excluding
angle- brackets for 19''
rack mounting of hub)
89 mm × 438 mm × 381 mm
(3.5 in. × 17.25 in. × 15 in.) (2U)
89 mm × 438 mm × 381 mm
(3.5 in. × 17.25 in. × 15 in.) (2U)
54 mm x 286 mm x
281 mm
(2.13 in. × 11.25 in.
× 1
1.13 in.)
Weight < 5.5 kg (< 12 lbs.) < 6.6 kg (< 14.5 lbs.) < 2.1 kg (< 4.6 lbs.)
a. 6-type N, female connectors for FSN-W2-MH-1, FSN-W2-MH-3, and FSN-W4-MH-1 Main Hub.
b. 2-type N, female connectors for FSN-W1-1921-1, FSN-W2-808519-1, FSN-W2-7575-1, FSN-W2-7070-1, FSN-W3-2626-1,
FSN-W4-702121-1-HP, FSN-W4-752121-1-HP, and FSN-2500-2-WMAX RAUs.
c. It is critical to system performance that only SC/APC fiber connectors are used throughout the fiber network, including fiber distribu-
tion panels.
d. FSN-W1-MH-2-1P, FSN-W2-MH-3-1P, FSN-W3-MH-1P, and FSN-W4-MH-1P support only one pair, SP/APC fibers.
e. Excluding angle-brackets for 19” rack mounting of hub.
Note: The Fusion Wideband Main Hub’s typical power consumption assumes that the CATV RG-59 cable length is no more than 130